Renovating alloy wheels. Although alloy wheels look much better than your average metal wheel they do require many more looking after. Grit, rain and wind can hit the top of the alloys, brake dust can also go into the surface to destroy your alloy wheels. Just slightly scuffing the curb can give your alloys a rough looking edge.
If there is any moderate impact deterioration, then utilize a small grinding stone, a metal brush or even a flap wheel on a drill to smooth this out. Take away the minimum amount of metal possible and as soon as you've got the area looking reasonably smooth again you may need some rubbing compound. The wheel will need to be polished, once most of the impact damage and corrosion has vanished. Use plenty of elbow grease as you can to truly get your wheels to as high a glow. Use a non-downy rag to apply the polish and then use a smooth fabric to buff it up. The next phase would be to give the wheels a relacquer with clear coat lacquer employing a narrow paint brush to apply it. All should be available from most accessory shops along with your wheels should look just like new.
There are two ways of refurbishing alloy wheels. One way will be to allow the experts do it, or if the harm is merely decorative the fixing can be achieved at home with just a bit of elbow grease and several tools. The first job is to mask up the tyres and any painted areas with newspaper and masking http://www.mintalloys.co.uk/alloy-wheel-refurbishment.html
tape on areas that you do not need to be influenced. Loose or flaky lacquer can be taken out with a wooden scraper, (avoid more of the wheel). damage using metal scrappers in case they slip and. Then the remainder of the lacquer can be taken off with some type of paint stripper. Take the normal precautions to prevent the stripper coming into contact with your skin. Once the lacquer has been removed, use someone rubbing compound with a damp cloth to disguise any small pitted areas. You may need to also use some good grade wet and dry paper to eliminate any severe corrosion.